Pages

Wednesday, October 3, 2007

Lesson Seven In Beekeeping: How To Install A New Package Of Bees

Here at Long Lane Honey Bee Farms, we are committed to help you be a successful beekeeper. David is a certified master beekeeper. You may consider joining us for one of David's beekeeping classes. Click here to see our upcoming classes.

Wouldn't it be nice to have a certified master beekeeper on the other end of the phone or email whenever you had a question. I started my new membership program and members are loving it. Beekeepers around the country have jumped on board. We still have room for more.

MEMBERS ONLY ACCESS TO:
-  1 New Instructional Videos Each Week.
-  My Personal Email and Cell Phone. You'll be a phone call away from a 
   certified master beekeeper.
   pictures of what concerns you and I'll advise you on the next step to take.

-  Picture/Video Evaluation Of Your Hive When Needed. Send me a video and/or
-  Weekly Tips Of What You Should Be Doing With Your Bees.
-  Your Choice Of 1(one) Item From Our Membership Gifts List
   Below: (After 6 months subscribed)
   - 1 Free class at our location per year (Does NOT Include Bee Institute)
   - 1 Free Winter-Bee-Kind
   - 1 Free Burns Bees Feeding System


We are a family business, a turn key beekeeping operation. We manufacture the hives ourselves, hand built for you, and we provide you with the bees and all the equipment you need. We appreciate your business and you'll find we won't treat you like a customer, but like a friend. And when you purchase your equipment from us, we're here for you. You can call us with your questions. We won't leave you hanging wondering what to do. Click here to see our complete online beekeeping store. Contact us today, and get started in beekeeping: 217-427-2678

To prepare for the arrival of your bees, you will want to purchase a new spray bottle and mix sugar water, one part water to one part sugar. Do not use old spray bottles that have been used with other chemicals as this could make the bees sick or kill them.
 Spray an ample supply of sugar water through the screen. Use the mist setting, not the stream. You CANNOT over spray your bees. They have been traveling for several days, and no doubt have been hot and not able to eat much, so the sugar water will really replenish their energy.

If you are traveling elsewhere with your bees, or after you pick them up from us, try to keep the package in a shaded or dark place in the car or truck. If you use a truck, try to avoid excessive wind damage that may occur if you place your bees in the bed of your truck. If you have to travel a long distance at interstate speed, and the bees are in the bed of your truck, place something around them, protecting them from the wind, while also providing sufficient air flow. Bees must have air to breathe just like us!

Sometimes, the weather might be too wet or cold to install your bees the same day they arrive. In this case, simply keep them in a cool basement or dark room and spray them with sugar water 3-4 times a day. They will usually be fine for a few days if you have to wait. Some dead bees on the bottom of their package is common. An inch or two of dead bees might be a problem, indicating they did not withstand the trip well. Call your supplier and report the findings.

If you see a few bees on the outside of your package, do not panic. It does not usually mean there is a leak. It usually means that a few bees have been clinging to the outside of the package for thousands of miles. But do check to make sure the box is sealed well.

Will the bees in the package sting you? Honeybees can always sting. However, you will find that by spraying them with sugar water, they are very calm. And, since they do not have any brood or honey to protect, they are not trying to defend their hive. Technically they don't have a queen either. Their morale is low, so they are not nearly as aggressive. When I install packages, I do not wear gloves or hat and veil. I would not recommend it to you, because you don't want a bad experience on your first installation, but you will find the bees to be very gentle. Work with confidence!
Now, here's how you can effectively install your bees in your new hive. Choose a good time of the day, when it is sunny, warm and not too windy. Mid to late afternoon works well. Be sure and take all your equipment to where you will install your package. You will need the following items:

1) Spray bottle with sugar water (1:1 ratio, one part water, one part sugar)
2) Hive tool
3) A wood screw (for removing queen cage cork)
4) A comfortable amount of protective clothing

Be sure your new hive equipment is where you want your hive to be. At this point, you will only need your bottom board, 1 deep hive body, 10 frames and foundation, inner and top cover. Remove 4 of the center frames from the new hive body. This is where you will shake your bees into. Spray all 10 frames, both sides, with the 1:1 sugar water mixture. This will attract the bees to the foundation and give them a warm welcome to their new home. Bees love sugar!


Also, before you install your package, you'll want to insert your entrance feeder or our new Burns Bees Feeding System. The BBF System is great for new packages. Comes with lids pre-drilled for your jar of 1:1 sugar water.

Bees need fed when first installed because they are not an operational hive just yet. They have no incoming food. So feed them for a couple of weeks the same mixture of 1:1 sugar water.

After 3-4 days, you can remove it entirely until fall. This step is important because occasionally packages can fly away (Abscond) after you install them. This restriction will help tremendously. While the chance of your new hive flying away is VERY RARE, but the possibility does exists. The reducer will help. They will stay put better than you would think. Do not fear that they are flying away because you see lots of bees flying around. This is normal. They need to stretch and go to the bathroom after traveling so far. Bees do not defecate inside their hive. They are very clean.
Now, spray the package thoroughly on both sides of the screen, front and back. This will calm the bees, keep them well nourished and keep them from flying about so much during the installation process. Remember, you cannot over spray. Be prepared for sticky hands and fingers.

Now, you will want to begin opening your package. Do not be afraid. Millions of bees are not going to rush out at you. Work with confidence and enjoy the activity.
To open the package, first remove the top panel. It is stapled on to the box. Staples are sharp, so don't cut yourself on the staples once the panel is removed. Use your hive tool to pry open the panel. But, be careful with your hive tool. The end is very sharp too, and if the tool should slip, it can poke or cut you.

Once you remove the top panel, NO bees will come out yet. This panel simply holds the feeding container in place as well as the white strap that has the queen cage on the opposite end, inside the package.




The bees may become noisy which is normal. Spray them again if you need to calm them. They are becoming loud not because you are making them mad, but simply because of the the sunlight and air. They are ready to do what bees do. Make a hive and gather nectar. Stay calm and confident!
Now you see the top of the tin can of sugar as well as the white queen cage strap. The queen cage strap is also stapled to the top of the box. Free this strap, but do not let it fall into the package of bees.







Gently tip the package of bees over the new hive, positioning it over the center where the 4 frames have been removed. Slide the sugar tin can out a little so you can get an easier grip on it. Sometimes the can comes out easily, and sometimes it is very tight and has to be wiggled out with considerable effort. It will come out.




Once you are ready, pull the can all the way out. At this point, the bees will have access to the great outdoors, specifically, their new hive. They will be attracted to the beeswax and sugar coated foundation awaiting them. Set the can of sugar water aside, holes facing up so it doesn't leak.
You will need to pull out the queen cage now, prior to shaking the bees or else it will fall into the hive. If it does, no problem. The queen is okay, just remove the cage and place it on top of the hive off to the side from where you'll be pouring your bees.

Now begin shaking your bees out of the package and into the new hive. Shake as hard as you want and you'll start seeing them pour into the new hive. You may also want to firmly strike the side of the package with the palm of your hand to free bees that are hanging on to the screen. However, be sure not to strike a bee when striking the side of the box or you might smash a bee just enough to get stung. Notice in the picture, I take advantage of the remaining sugar water in the tin can by placing if over the entrance feeder. I usually poke a few more holes with a nail so the bees will consume it more quickly. After it is finished, I replace it with a mason jar with holes in the lid.


Now you must install your queen. Slow release method is the best. These are not her bees, and she is not the queen they are used to YET! So, you must let them get to know her before she can roam freely among her new hive. Here's how. The queen cage has a screen on top and through the screen you can identify a white candy substance at one end. This is the end that you will HAVE TO remove the cork. DO NOT REMOVE THE CORK AT THE OPPOSITE END OF THE CANDY. Only remove the cork from the candy end of the cage. A hive tool doesn't work well, but screwing in a small screw then pulling it out works well. Once the cork is out, you will see that the hole is still plugged with the white candy. GOOD! Do not disturb that candy plug. As the bees eat through the candy, they will become familiar with their new queen. Then, once the candy has bee eaten, she will emerge from her cage as queen of the hive and be readily accepted by her new workers. After all, they are ready for a queen themselves!
Once you've removed the cork, you will want to place the cage between the frames in the center of the hives from the top. Notice how I use the pressure of the hive frames to hold the cage between the frames. I hang my queen cage with the candy side down. Some say to hang it with the candy up, in case her attendant bees within her cage die, they do not block her exit. However, bees are good about moving dead bees out of the way, and I want her to exit out onto the foundation.

PLAY CLOSE ATTENTION. YOU MUST REPLACE ALL 10 FRAMES!! If you don't, the bees will quickly make comb in place where your frames should have gone. This will be a mess. And they will attach their comb to your top cover and if you wait long enough, you will not be able to open your hive. SO YOU MUST REPLACE ALL 10 FRAMES before replacing the inner and top cover.
Do not place any other boxes on the hive just yet. You only need the one deep box. Let them draw out the comb, usually 6-8 frames, then you can place your second hive body on top. Once 6-8 frames of your second deep have been drawn out, you can start placing your supers on.

Great Job! You Did It!! Place the package box near the front of the hive because it will still have some bees that you were unable to shake out of it. These will find their way into the hive in a day or two.